SLIDING BEARINGS
    PICK UP DISPLACEMENT PATHS

Sliding bearings

 

Short description

The reinforced point sliding bearing is loadable up to a compressive stress of 15 N/mm². Ciparall® Sliding Bearings combine sliding and deformation properties of the bearing where the sliding action is independent from the deformation. Depending on the requirements, bearings of different thicknesses can be selected.
 
The approval is applied.

Short description

Civalit® sliding bearings are used in standard sizes as single pad bearing or as strip supported bearing. The number of modules determines the size of the bearing. The bearing has transverse tensile reinforcement and consists of an elastomer based on chloroprene with a vulcanized PTFE sliding layer and a sliding plate made of grp. These two components guarantee a dimensionally stable sliding surface. The total thickness of the bearing is 11 mm. Average bearing capacity  up to 15 N/mm².
 
The approval is applied.

Short description

The steel-reinforced elastomeric bearing is loadable up to a compressive stress of 25 N/mm². The bearing can be provided in different thicknesses and is able to take up even large horizontal displacements by sliding on each other and angles of distortion. Restoring forces are minimized.
 
The approval is applied.