A profiled heavy-duty unreinforced elastomeric bearing with little creep and constant natural frequency for a wide load range. The bearing is particularly suitable for support of machines and structures with high compression stress like pileheads. The bearing consists of NR, is temperature resistant from -30° up to +70°, does not absorb water and is available in different thicknesses. The effective compressive stress range is about 0.5 – 4.0 N/mm². The lowest natural frequency is 8 Hz. Cipremont® can be used whenever highly stressed structural members have to be separated from each other for the protection against vibration and structure-borne noise. Depending on the type of loading the support is either a strip or point support.
The bearing is used in the areas of structural dynamics, elastic vibration isolation for buildings (also in groundwater) and machines.