05/26/25

👷 👩‍💻 Calculating thermal separations for steel construction has never been so easy.

🖥️ ⌨️ 🖱️ Calenberg's “Kernkompactlager” thermal separation bearing has recently been designed with permissible design compressive stresses in accordance with building authority approval.

Specified: Design load level is calculated, which serves as calculation basis for the 4H-EC3TT software tool from the Hannover-based company pcae.
The calculation tool enables you to calculate rigid end plate joints of double T-profiles within a very short time.

Note: Previous versions require an upgrade to be able to calculate at design stress level.

The following features are available:
✅ Import of internal forces
✅ Calculation of the permissible load-bearing capacity of a joint with interface
✅ Bolts and steel grades can be taken from the list box or specified by the user
✅ Output report in German and English possible

The programme can be installed as often as required within a branch (on individual workstations or as a network installation) and used simultaneously.

ℹ️ You can find more information about the software and the company here.